Solutions
Dry coolers
Units that cool water, glycol or oil in a closed loop by blowing ambient air through a finned coil with fans. They evaporate no water: the fluid never touches the air.


How it is built
The hot fluid runs through a finned-tube coil, usually tubes expanded into aluminum fins. Fans push or pull air across the coil and carry the heat away. They are built flat or in a V layout, depending on the space available.
Why it pays off
Uses no waterUnlike a cooling tower, it does not evaporate water to cool. It works where water is scarce, expensive or off-limits, such as arid sites.
The fluid stays cleanThe loop is closed: no dust or air gets into the fluid, and there is no make-up water to treat or blowdown to manage. The engine or process always gets the same fluid.
No water mistIt does not throw off the droplet plume of an evaporative tower, so there is no Legionella risk and no water wetting the surroundings.
Simple upkeepUpkeep comes down to the fans and cleaning the coil. With glycol it runs in freezing climates without the loop freezing up.
Where it works best
- Remote radiators for generator sets
- Closed-loop process water
- Cooling for compressors and hydraulic systems
- Sites without water for a cooling tower
When another one fits better
It depends on air temperature: it can never cool the fluid below it, and it delivers less on hot days. If you need the fluid colder than ambient you need an evaporative tower or a chiller, and for the same heat load it takes more space than a tower.
Industries where we use it
Is this the
one you need?
Tell us the equipment and the conditions. A plant engineer gets back to you.WhatsApp +54 9 342 635-6566













