Solutions

Flat-to-round tube

Radiators whose tubes are flat along the core and round at the ends, where they enter the header plate. It is a typical build for heavy-duty radiators.

Flat-to-round tube
Detail of a flat-to-round tube: the flat finned section and the round end entering the header plate.

How it is built

Along the finned length the tube is flat, for more contact with the fin and less frontal area against the air. At the ends it is formed round and fixed into a round hole in the header plate. Each part of the tube has the shape that best suits its job.

Why it pays off

More fin contactThe flat face of the tube bears on the fin across its full width. Heat passes from the coolant to the fin through more surface than with a round tube.
Less drag on the airThe flat profile lets air through with less pressure drop than a round tube, so the fan moves more air for the same power.
Sound joint at the headerThe tube-to-header joint is where a radiator suffers most from vibration and thermal cycling. A round hole seals evenly all the way around and spreads those stresses better than a flat slot.

Where it works best

  • Radiators for haul trucks and mining equipment
  • Locomotive radiators
  • Generator sets in continuous duty
  • Engines running under heavy vibration

When another one fits better

It takes more work to make than a core with straight tubes. If the machine is not in heavy duty, a conventional copper and brass or brazed aluminum core is usually enough.

Is this the
one you need?

Tell us the equipment and the conditions. A plant engineer gets back to you.WhatsApp +54 9 342 635-6566