Solutions

Expanded Al-Cu and Al-Al

Coils of round copper or aluminum tubes, mechanically expanded into flat aluminum fins. It is the classic build for air coils, condensers and dry coolers.

Expanded Al-Cu and Al-Al
Cutaway of an expanded coil: round tubes passing through flat fins, with each fin collar pressed tight against the tube.

How it is built

The fins, punched with collared holes, are stacked and the tubes are pushed through. Each tube is then expanded from the inside with a tool until it is tight against the fin collars. Return bends and headers close the circuits.

Why it pays off

Circuiting to suitRows, passes and number of circuits are set at the design stage without changing the process. The coil is matched to the flow and the pressure drop your system can take.
Round tubes hold pressureFor the same wall thickness, a round tube takes more pressure than a flat one. That suits refrigerants and pressurized circuits.
Copper or all-aluminumWith copper tubes (Al-Cu), bends and connections are brazed and repaired with well-known techniques. With aluminum tubes (Al-Al) the coil is lighter and, being a single metal, forms no galvanic couple between tube and fin.

Where it works best

  • Dry coolers and condensers
  • Air heating and cooling coils
  • Cold room evaporators
  • Air-to-water heat recovery coils

When another one fits better

The tube-to-fin bond is mechanical contact, not a brazed joint: under heavy vibration or harsh thermal cycling it can loosen and lose performance. In corrosive settings such as the coast, the copper-aluminum pair needs a coating, and in heavy dust closely spaced fins clog.

Is this the
one you need?

Tell us the equipment and the conditions. A plant engineer gets back to you.WhatsApp +54 9 342 635-6566